SGOES

red flame icon
Fast Response
High sensitivity to all hydrocarbon gases/vapors within 1-2 sec
red flame icon
Wide Operating Temperature
Makes SGOES great choice for challenging applications from -60°C to +90°C
red flame icon
2 year Calibration Interval
The longest industry interval between calibration is 2 years
red flame icon
5 year warranty
Long product life with low cost to operate over time

Electrical Specifications

Power Requirements: 24VDC nominal (18-32VDC range)

Power Consumption: 7.9W maximum

Signal Outputs: +4-20mA, Digital RS485 MODBUS RTU, HART, Relays

Alarm Relays:
2 User Programmed Alarm Relays (factory default setting: NO)
1 Fault Condition Programmed Relay (factory default setting: NC)

Performance Specifications

Gas Detection Range: 0-100% LEL

Accuracy: ± 2% of the full-scale gas concentration

Response Time (for 100% LEL methane):

50% full scale < 1.5 seconds

90% full scale < 2.0 seconds

Mechanical Specifications

Ingress Protection: IP66

Operating Temperature: -76⁰ F to +185⁰ F (-60⁰ C to +85⁰ C)

Storage Temperature:

Humidity Range: Up to 95% relative humidity, non-condensing (Withstands up to 100% relative humidity for short periods)

Conduit Connection: ¾” NPT

2 connections for Field Wiring

1 connection for HART/USB

Enclosure Material: Stainless Steel (Grade 316L) or Aluminum

Dimensions: 8.01” x 5.30” x 5.12” (203.5mm x 134.50mm x 130mm)

Weight: 14.33lb (6.5 kg)

  • Drilling and production platforms
  • Shipping tankers, freighters, and other vessels
  • Fuel loading facilities
  • Refineries, bulk terminals, and tank farms
  • LNG/LPG processing and storage facilities
  • Compressor stations and pipeline facilities
  • Petrochemical, paint, and fertilizer plants
  • Power plants and gas turbine facilities
  • Transportation facilities (airports and subways)
  • Oil and gas fired boilers / furnaces • Environmental regulation monitoring
calkit

Gas Calibration Kit

Available for one or two calibration gases. Single Gas Kit includes Mid-Span gas cylinder, regulator, 36” length of clear flex tubing, carrying case

Calibration Cup

Used during the gas calibration.

magwand

Calibration Magnet

Used for easy one-man calibration of SGOES with 50% LEL gas or to reset device.

SGOESProtectiveCover

Weatherproof Protective Cover

Hydrophobic filter to protect the gas detection chamber from dust and water intrusion.

Duct Mount

Monitors airflow in ductwork.

Vector copy

Vector display

Add Vector Field Control Unit for local display function


Visit our Customer Center for product resources

 

SGOES RESOURCES

Contact Us / Find a Rep
+1.408.886.9746