Vector- Combustible

Combustible Gas Detectors

Vector- Combustible

SKU 100-0008/100-0015-GAS

SIL 2 Certified

The Vector is state-of the-art point gas detector with local display. It can be configured to monitor up to two sensors directly connected or remotely installed up to a separating distance of 500 ft. For combustible detection, it can use a plug-in sensor that is either IR (Infrared) or a catalytic bead type.

The unit comes standard with multiple outputs, allowing you to choose whether to connect via 4-20mA, RS485, or relay to your system for reliable communication. The Vector makes the calibration process easy and seamless with on-site non-intrusive calibration via local display or using HART hand held device. The event log stored in on-board memory allows it to maintain calibration records and diagnostics.

The Vector can be used as a multi-use display unit that can receive signals from all of ESP Safety’s gas detectors (SGOES, TGAES, and PGU). The vivid OLED display shows the type of gas, real-time concentration, and alarm levels.

The detector comes in stainless steel housing.

REQUEST QUOTE DOWNLOAD PDF

Configurable to 2 detectors

save cost by monitoring 2 different gases in one location or use one display for 2 different locations

Event Data Log

stored in on-board memory can be accessed via display or RS-485 Modbus RTU

OLED screen

simultaneously displays a wide range of data including gas concentrations, alarm levels, faults and operational modes

5 year warranty

Long product life with low cost to operate over time

Electrical Specifications

Power Requirements: 24VDC Nominal (18 to 32VDC)

Power Consumption: 4.3 W-Standby; 5.3 W-During Alarms; 12.0 W-w/ Heater On (temp ≤ 30°F)

Signal Output From Vector FCU: 2x +4-20mA analog output, Digital RS-485 Modbus RTU, Relays, HART

Alarm Relays:
3 User Programmed Alarm Relays (factory default setting: NO)
1 Fault Condition Programmed Relay (factory default setting: NC)

Mechanical Specifications

Ingress Protection: IP66/67

Operating Temperature: -58°F to +167°C (-50°C to +75°C) -76°F to +167°C (-60°C to +75°C) with heater enabled

Storage Temperature: -76°F to +185°C (-60°C to +85°C)

Humidity Range: 0 to 100% Relative Humidity, Non-Condensing

Conduit Connection: ¾” NPT
2 Connections for Sensors
2 Connections for Field Wiring

Enclosure Material: Stainless Steel (Grade 316L) or Aluminum

Dimensions: 7.50” x 5.60” x 4.28” (190.5mm x 142.24mm x 108.71mm)

Weight: Vector with one PGU attached – 14.00 lbs (6.35 kg)

Offshore platforms
Land rigs
Shipping tankers, freighters, and other vessels
LNG/LPG processing & storage facilities
Oil & gas refineries
Petrochemical plants
Gas & electric utilities

Magnetic Wand

Used for accessing display settings and perform calibrations.

PGU-Protective Cover

Offers sensor protection against water and dust intrusion.

PGU Calibration Cup

Used in the PGU calibration.

Duct Mounting Kit

Monitors airflow in ductwork.

Calibraiton Gas Kit

Available for one or two calibration gases. Single Gas Kit includes Mid-Span gas cylinder, regulator, 36” length of clear flex tubing, carrying case.

Visit our Customer Center for product resources

VECTOR- COMBUSTIBLE RESOURCES