- SIL 2 Certified
The state-of-the-art Vector Oxygen Gas Detector with local display is designed to safely detect and monitor oxygen levels in the environment. The electrochemical sensor will monitor the current oxygen level and signal an alarm if oxygen is decreased in the area.
It can be configured to monitor up to two sensors directly connected or remotely installed up to a separating distance of 500 ft.
The unit comes standard with multiple outputs, allowing you to choose whether to connect via 4-20mA, RS485, or relay to your system for reliable communication. The Vector makes the calibration process easy and seamless with on-site non-intrusive calibration via local display or using HART hand held device. The event log stored in on-board memory allows it to maintain calibration records and diagnostics.
Power Requirements: +24VDC Nominal (+18 to 32VDC)
Power Consumption: 4.3 W-standby; 5.3 W-during alarms; 12.0 W-w/ heater on (temp ≤ 30°F)
Signal Output From Vector FCU: 2X +4-20mA analog output, Digital RS-485 Modbus RTU, Relays, HART
3 User Programmed Alarm Relays (factory default setting: NO)
1 Fault Condition Programmed Relay (factory default setting: NC)
Ingress Protection: IP66/67
Operating Temperature: -58°F to +167°C (-50°C to +75°C) -76°F to +167°C (-60°C to +75°C) with heater enabled
Storage Temperature: -76°F to +185°C (-60°C to +85°C)
Humidity Range: 0 to 100% relative humidity, non condensing
Conduit Connection: ¾” NPT
2 connections for Sensors
2 connections for Field Wiring
Enclosure Material: Stainless Steel (Type 316L) or Aluminum
Dimensions: 7.50” x 5.60” x 4.28″ (190.5mm x 142.24mm x 108.71mm)
Weight: Vector with one PGU attached – 14.00 lbs (6.35 kg)
- Freezer chemical storage areas
- Prototyping and welding buildings
- General buildings
- Controlled labs for critical processes
- Analyzer rooms
- Confined rooms or areas.
PGU Calibration Cup
Calibraiton Gas Kit
Oxygen Detection Range: 0-30%v//v